Brauniger / Flytec

This file can be used to load airspaces into the Brauniger Competino or Compeo and Flytec 5020, 5030, 6020 or 6030 vario/GPSs.

To load the airspace file you must use the Flychart software package that comes with these GPSs. If you don't have it Flychart can be downloaded from the Brauniger website.

Instructions:

1. Download the file attached below and save it to your computer.
2. Open Flychart and select "Extras > Flight instrument options..." from the menu.
3. Click on "Restricted areas" in the list on the left.
4. Click on the "Load..." button, browse to the file that you downloaded and click "Open".
5. All the airspaces contained in the file will be listed at the top of the window. When you click the "Upload..." button all the selected airspaces (those with a green tick) will be uploaded to the GPS. By default all airspaces are selected. You may choose to deselect the airspaces you are not interested in. To do that right-click on an airspace and use the "select" menu options. If you have a 5020, 6020 or Competino you will have to deselect some airspaces because those models support a maximum of 20.
6. When you have the necessary airspaces selected click on the "Upload..." button to load them into the GPS.